How to configure EZVIZ cloud cameras to join the network using alternate methods - FAQ - EZVIZ SupportEZVIZ, support, support center, FAQ, frequently asked question, product support, Smart home, Surveillance, Security, IPC, Security Camera, IP Camera, Security Camera, Action Camera, , Action Camera, NVR, networkRead frequently asked questions about EZVIZ products and service.
EZVIZ Cloud cameras can be configured to join the network using alternate methods;
1. Reverse QR code
2. Mobile Hotspot ( For Android Phones only)
1. Reverse QR code Method
When the device failed to push the Wi-Fi credentials, Click on “Generate a QR code” tab
Input your Wi-Fi password and click on “Next”
Point the lens of the device to the QR code shown on your mobile phone and hold about 5” close, once this process is successful, the status lights will start flashing blue, click on the “next” to add the device to your account and complete the setup.
2. Use the Hot spot feature on your mobile phone to create a Wi-Fi connection.
(Android Devices Only)
Turn off your home router
Step 1: Turn on the hot spot feature of mobile phone A, when setting up the mobile hotspot, make sure the SSID and password is the same as your router’s SSID and password.
Step 2: Configure mobile device B to join the Wi-Fi that you just created on the mobile hotspot (connect to the Wi-Fi of mobile phone A)
Step 3: Connect the mini using mobile device B to the hotspot created on mobile phone A
Step 4: When Wi-Fi configuration is successful, and device is now online, turn off the hot spot feature of mobile phone A.
Step 5: Turn on the power of your router; the device will connect to the router’s Wi-Fi automatically.
If you require further assistance, visit our online @ https://community.ezvizlife.com/hc/en-us