Please note that for most EZVIZ devices, there are usually three ways to get the 6 capital letters device code:
1. You can find it on the device
label of the EZVIZ device;
- For models such as BC1 and HB3 kit, the default password is
the 6-digit capital letter device code located on the white sticker of the base
station.
- For models such as DB2 and DB2C kit, the
default password is the 6-digit capital letter device code located on the white
sticker of the chime.
- For models such as DB1, please remove the cover of the
doorbell and scan the code with a third-party QR code scanner.
- If the camera is linked to an NVR/DVR, such as an X4 or X5
device, and if it is initially set up by adding to NVR/DVR directly, the
password will be the admin/login password of
the NVR/DVR you created for the NVR/DVR during the initial setup.
2. For some models, there is a QR code on
the manual cover that contains device information (Note: no such info if on the
cover it says, "scan the QR code for detailed manual”). And you can use a
third-party QR code scanner to scan it to get the device code;
3. Alternatively, you can find it in the
Device QR Code or Verification Code in the camera Settings > Device
Info/About on the EZVIZ mobile app if you have previously set up the device
with this phone. Apart from this, for some models, if the cameras are online
now, you can also tap the eye-like icon, and enter the OTP (one-time password)
sent to the e-mail address or phone number you used to register the EZVIZ
account, then the verification code will be displayed after verification.
If the methods mentioned above do not resolve
your issue, please ensure not to delete the device from your account and
promptly reach out to the EZVIZ support team at account@ezviz.com or engage
with the online chat agent via the chat window located at the bottom right of
this page.
Son güncelleme 17/11/2025
Bu yardımcı oldu mu?
EvetHayırTeşekkürler geri bildiriminiz için!