What should I do if I have lost my EZVIZ device verification code

Please note that for most EZVIZ devices, there are usually three ways to get the 6 capital letters device code:

1.     You can find it on the device label of the EZVIZ device;

- For models such as BC1 and HB3 kit, the default password is the 6-digit capital letter device code located at the white sticker of the base station.

- For models such as DB2 and DB2C kit, the default password is the 6-digit capital letter device code located at the white sticker of the chime.

- For models such as DB1, please remove the cover of the doorbell and scan the code with a third-party QR code scanner. 

- If the camera is linked to an NVR/DVR, such as an X4 or X5 device, and if it is initially set up by adding to NVR/DVR directly, the password will be the admin/login password of the NVR/DVR you created for the NVR/DVR during the initial setup.

2. For some models, there is a QR code on the manual cover that contains device information (Note: no such info if on the cover it says, "scan the QR code for detailed manual”). And you can use a third-party QR code scanner to scan it to get the device code;

3. Alternatively, you can find it in the Device QR Code or Verification Code in the camera Settings > Device Info/About on the EZVIZ mobile app if you have previously set up the device with this phone. Apart from this, for some models, if the cameras are online now, you can also tap the eye-like icon, and enter the OTP (one-time password) sent to the e-mail address or phone number you used to register the EZVIZ account, then the verification code will be displayed after verification.

If you still need further assistance, please feel free to contact the EZVIZ support team at account@ezviz.com or the online chat agent via the chat window at the bottom right of this page.