tip EZVIZ no longer supports Internet Explorer 10 or earlier versions, and the site may not behave as expected. Please upgrade to a newer browser.
Alegeți o țară sau o regiune pentru a vedea conținut specific locației și nevoilor dvs. Veți fi redirecționat către site-ul dvs. local.
  • How to configure the EZVIZ touch panel devices?

    Applies to: DP1/DP2/CP4 door viewer


    You may try the following steps to initially set up your EZVIZ door viewer with touch panel:

    Step 1: Power on your device by pressing the power button.

    Step 2: Click the "Settings" button on the screen.

    Step 3: Tap "Network settings".

    Step 4: Select the WiFi network you want to connect to.

    Step 5: Enter the WiFi password until the connection is successful. Please ensure that your Wi-Fi password is less than 32 characters and excludes special characters.


    If you fail to configure the device, we suggest you may check the below network requirements first:

    1. Ensure that you have connected your mobile device to 2.4G Wi-Fi.

    2. Ensure that your Wi-Fi network connection is good and functional. Most EZVIZ devices perform better when upload speed is greater than 2 mbps for each camera.

    3. Ensure that your Wi-Fi network signal is good. Try to avoid obstacles and interference such as wall, elevator, microwave, washing machines, and Bluetooth devices.

    4. Ensure that DHCP settings on your router is on.

    5. Ensure that when you configure network, your EZVIZ device is close to your Wi-Fi router. We do suggest that you keep the distance shorter than 1.5 meter.

    6. Ensure that the Wi-Fi security on your router is WPA or WPA2, and your Wi-Fi password is less than 32 characters and excludes special characters.


    By following these steps, you can effectively troubleshoot and resolve issues with your EZVIZ door viewer's connection to Wi-Fi. If you need further assistance, don't hesitate to contact our support team for personalized guidance.


  • How many face recognitions and palm veins can be added to HP7 Pro?

    Please note that up to 50 face recognitions and up to 20 palm veins can be added to HP7 Pro.

  • How to configure speaker settings for the gate opener?

    To configure speaker settings for the gate opener, please follow the steps below:

    1. On the detail page of the wireless repeater, tap the device card of the gate opener and select "Speaker Details".

    2. On the "Speaker Details" page, you can turn on the Door Opening Reminder and select a reminder sound as you like.

    3. Tap "Save" in the upper-right corner.

    After you enable the Door Opening Reminder, each time when the gate is opened or closed, the wireless repeater will make a sound.


Acest site web folosește cookie-uri pentru a stoca informații pe dispozitivul dvs. Cookie-urile ajută site-ul nostru să funcționeze normal și ne arată cum vă putem îmbunătăți experiența utilizatorului.
Continuând să navigați pe site, sunteți de acord cu politica privind cookie-urile și cu politica noastră de confidențialitate.

Am actualizat Termenii și condițiile, Termenii abonamentului cu plată la CloudPlay și Politica de confidențialitate . Vă rugăm să le citiți cu atenție.

Vă oferim servicii personalizate și experiență de utilizator sigură cu Cookie. Autentificarea și navigarea pe site-ul nostru indică faptul că ne-ați permis obținerea de informații în afara site-ului web cu Cookie. Vă rugăm să vizitați Utilizarea cookie-urilor