How to add your EZVIZ devices to SD7 smart screen

Before adding your other EZVIZ devices to the SD7 smart screen, please note the following:

1. Ensure that both the SD7 and your other EZVIZ devices are linked to the same EZVIZ account.

2. Enable “Terminal Authorization” for the SD7 device by navigating to its Device Settings > More > Terminal Authorization.

Next, please follow these steps to add your other EZVIZ devices to the SD7 screen:

1. On the home page, tap the SD7 device card to access the device linkage page.

2. Tap the “Link Device” button.

3. Select either a single device or multiple devices that you wish to link, then tap "Link". For smart video doorphone devices, please select their corresponding doorbell and make sure the that “Terminal Authorization” for the smart video doorphone devices are also enabled by navigating to Device Settings of their monitor> More > Terminal Authorization.

4. Wait for the confirmation message indicating “Linked successfully.”

5. Return to check the linked devices. If you wish to unlink any device, tap the three-dot icon located to the right of the device name. This will reveal the “Unlink” button.