EZVIZ no longer supports Internet Explorer 10 or earlier versions, and the site may not behave as expected. Please upgrade to a newer browser.
Please follow the instructions below to set up your X5S-16L2:
1. Connect the LAN interface of NVR to that of the router using an Ethernet cable.
2. Connect the camera to the same router.
3. Connect the mouse to the USB interface of the NVR and connect the NVR to a local monitor using a VGA or HDMI cable.
4. Connect the NVR to a power source and turn on the power switch.
5. Follow the wizard on the local monitor, create a new device password, and complete the setup.
6.Go to “Menu” >> “Camera” >> “Search” >> “Add” to link the cameras.
7. If you intend to add 24*2MP cameras, please do remember to set 24-Channel Mode in “Menu” >> “Configuration” >> “General” >> “Enable 24-Channel Mode”.
8. Log into the EZVIZ app > click on the “plus” tab to add a device >> scan the QR code shown on the screen or the device label.
