EZVIZ no longer supports Internet Explorer 10 or earlier versions, and the site may not behave as expected. Please upgrade to a newer browser.
Please follow the below steps to set up your X5S-4P, X5S-8P:
1. Connect the LAN interface of NVR to that of router using Ethernet cable.
2. For POE cameras, connect the camera to the POE port of NVR.
3. For IP cameras, connect the camera to the same router.
4. Connect the mouse to the USB interface of NVR and connect the NVR to a local monitor using a VGA or HDMI cable.
5. Connect the NVR to a power source and turn on the power switch.
6. Follow the wizard on the local monitor, create a new device password, and complete the setup.
7. Go to “Menu” >> “Camera” >> “Search” >> “Add” to link the cameras.
8. Log into the EZVIZ app > click on the “plus” tab to add a device >> scan the QR code shown on the screen or the device label.
